Supermicro X11DDW-L - Page 47

47
Chapter 2: Installation
Power Button
OH/PWR Fail/Fan Fail LED
1
Reset Button
2
Power Fail LED
HDD LED
Power LED
Reset
PWR
UID LED
Ground
Ground
19 20
3.3V
X
Ground
NMI
X
NIC2 Activity LED3.3V Stby
3.3V Stby
3.3V Stby
NIC1 Activity LED
3.3V
NIC1/NIC2 (LAN1/LAN2)
The NIC (Network Interface Controller) LED connection for LAN port 1 is located on pins
11 and 12 of JF1, and LAN port 2 is on pins 9 and 10. Attach the NIC LED cables here to
display network activity. Refer to the table below for pin denitions.
1. NIC2 LED
2. NIC1 LED
3. HDD LED
LAN1/LAN2 LED
Pin Denitions (JF1)
Pin# Denition
9 NIC 2 Activity LED
11 NIC 1 Activity LED
HDD LED
The HDD LED connection is located on pins 13 and 14 of JF1. Attach a cable to pin 14 to
show hard drive activity status. Refer to the table below for pin denitions.
HDD LED
Pin Denitions (JF1)
Pins Denition
13 3.3V Stdby
14 HDD Active
1
2
3