Supermicro X11DDW-L - Page 86

Super X11DDW-L/NT User's Manual
86
Package C State Control (Available when "Power Technology" is set
to Custom)
Package C State
This feature is used to optimize and reduce CPU package power consumption in idle mode.
Please note that the changes you've made in this setting will a󰀨ect all CPU cores or the
circuits of the entire system. The options are C0/C1 state, C2 state, C6 (non-Retention)
state, C6 (Retention) state, No Limit, and Auto.
CPU T State Control Available when "Power Technology" is set to
Custom)
Software Controlled T-States
If this feature is set to Enable, CPU throttling settings will be supported by the software of
the system. The options are Enable and Disable.
Chipset Conguration
Warning: Setting the wrong values in the following items may cause the system to malfunction.
North Bridge
This feature allows the user to congure the settings for the Intel North Bridge.
UPI (Ultra Path Interconnect) Conguration
This section displays the following UPI General Conguration information:
• Number of CPU
• Number of Active UPI Link
• Current UPI Link Speed
• Current UPI Link Frequency
• UPI Global MMIO Low Base/Limit
• UPI Global MMIO High Base/Limit
• UPI PCI-E Conguration Base/Size