Supermicro X11DDW-L - Page 97

Chapter 4: UEFI BIOS
97
*If Intel® VMD for Volume Management Device for PStack1 is set to Enable, the fol-
lowing item will display.
RSC-R2UW-4E8 SLOT1 VMD
Select Enable to enable Intel Volume Management Device Technology support for the
PCI-E slot specied by the user. The options are Enable and the Disable.
RSC-R2UW-4E8 SLOT2 VMD
Select Enable to enable Intel Volume Management Device Technology support for the
PCI-E slot specied by the user. The options are Enable and the Disable.
Hot Plug Capable
Select Enable to enable Hot Plug support for the root ports specied by the user, which
will allow the user to change the devices on those root ports without shutting down the
system. The options are Disable and Enable.
*If Intel® VMD for Volume Management Device for PStack2 is set to Enable, the fol-
lowing item will display.
RSC-R2UW-2E8R SLOT2 VMD
Select Enable to enable Intel Volume Management Device Technology support for the
PCI-E slot specied by the user. The options are Enable and the Disable.
RSC-R2UW-2E8R SLOT1 VMD
Select Enable to enable Intel Volume Management Device Technology support for the
PCI-E slot specied by the user. The options are Enable and the Disable.
Hot Plug Capable
Select Enable to enable Hot Plug support for the root ports specied by the user, which
will allow the user to change the devices on those root ports without shutting down the
system. The options are Disable and Enable.
South Bridge
The following South Bridge information will display:
• USB Module Version
• USB Devices
Legacy USB Support
Select Enabled to support onboard legacy USB devices. Select Auto to disable legacy support
if there are no legacy USB devices present. Select Disable to have all USB devices available
for EFI applications only. The options are Enabled, Disabled and Auto.