EasyManua.ls Logo

Supermicro X11DPH-Tq - Page 206

Supermicro X11DPH-Tq
223 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Super X11DPH-i/X11DPH-T/X11DPH-Tq User's Manual
206
Get target info via DHCP (available when Enable DHCP is set to Enabled)
Use this feature to disable/enable dynamic host confi guration protocol (DHCP) server service
for the iSCSI target. The options are Disabled and Enabled.
Note 1: Set the feature, Get target info via DHCP, to Disabled if you would like to
specify the iSCSI target name/IP address/boot LUN.
Note 2: LUN stands for logical unit number, which is used to identify a logical/physical
disk.
Target Name
Use this feature to enter the desired iSCSI target name in IQN format.

Table of Contents

Related product manuals