Supermicro X11SSQ-L - Page 120

Super X11SSQ/-L/-V User's Manual
120
PAVP Enable
Use this feature to enable or disable the protected audio video path (PAVP). The options
are Disabled or Enabled.
DMI/OPI Conguration
The following DMI information will display:
• DMI
DMI VC1 Control
Use this feature to enable or disable DMI Virtual Channel 1. The options are Enabled and
Disabled.
DMI VCm Control
Use this feature to enable or disable the DMI Virtual Channel map. The options are Enabled
and Disabled.
CPU DMI Link ASPM Control
Use this feature to set the ASPM (Active State Power Management) state on the SA (System
Agent) side of the DMI Link. The options are Disabled and L1.
DMI Extended Sync Control
Use this feature to enable or disable the DMI extended synchronization. The options are
Disabled and Enabled.
DMI De-Emphasis Control
Use this feature to congure the De-emphasis control on DMI. The options are -6dB and
-3.5dB.
PEG Port Conguration
CPU SLOT7 PCI-E 3.0 X16
SLOT7 Max Link Speed
This feature allows the user to select PCI-E support for the device installed on SLOT7. The
options are Auto, Gen1, Gen2, and Gen3.
SLOT7 Max Payload Size
Use this feature to select the PEG0 maximum payload size. The options are Auto, 128
TLP, and 256 TLP.