Supermicro X11SSQ-L - Page 53

53
Chapter 2: Installation
1
10
4
1
1
X11SSQ
REV: 1.01
DESIGNED IN USA
Tested to Comply
With FCC Standards
FOR HOME OR OFFICE USE
BIOS
LICENSE
J23
JPW2
B3
JP7
J18
SP1
LED1
COM3
JSTBY1
JD1
FAN3
FAN4
FAN1
FAN2
JPME2
JWD1
JLED1
JI2C2
JI2C1
JPL2
JPAC1
JPL1
JPW1
JL1
I-SATA5
I-SATA2
I-SATA4
I-SATA1
I-SATA3
I-SATA0
JF1
JBT1
I-SGPIO2
JSD1
JTPM1
COM4
JVR1
I-SGPIO1
LED3
JSMB1
MAC CODE
BAR CODE
COM2
COM1
JAT1
GP7
GP6
GP5
GP4
GP3
GP2
GP1
GP0
AUDIO FP
USB6/7
PCH SLOT4 PCI-E 3.0 X4
PCH SLOT5 PCI-E 3.0 X4
PCH SLOT6 PCI-E 3.0 X1
USB10/11(3.0)
HD AUDIO
CPU SLOT7 PCI-E 3.0 X16
DIMMA2
DIMMA1
DIMMB1
DIMMB2
UNB NON-ECC DDR4 DIMM REQUIRED
ALWAYS POPULATE BLUE SOCKET FIRST
M.2 PCI-E 3.0 X2
LAN2
USB2/3
USB8/9(3.0)
LAN1
HDMI/DP
CPU
DVI-D
CPU FAN
KB/MOUSE
USB0/1
USB4/5
CATERR_LED
1
1. Embedded DisplayPort (X11SSQ only)
Embedded DisplayPort (eDP) (X11SSQ only)
The eDP header is used to connect an embedded display LED or LCD Panel. eDP is a
companion standard to the DisplayPort interface designed for em bedded display applications,
including notebook PCs, tablets, netbooks and all-in-one desktop PCs. X11SSQ support 3.3V
eDP LED or LCD panel only. The X11SSQ supports eDP standard version 1.4. Refer to the
table below for pin denitions.
Embedded DisplayPort (eDP)
Pin Denitions
Pin# Denition Pin# Denition
1 LCD_VCC 23 Lane0_N
2 LCD_VCC 24 Lane0_P
3 LCD_VCC 25 H_GND
4 LCD_VCC 26 AUX_CH_P
5 LCD_VCC 27 AUX_CH_N
6 LCD_GND 28 GND
7 LCD_GND 29 VCC3_3
8 LCD_GND 30 NC
9 LCD_GND 31 BL_PWR
10 HPF 32 GND
11 NC 33 GND
12 NC 34 VCC5
13 H_GND 35 NC
14 Lane3_N 36 L_BKLT_CTRL
15 Lane3_P 37 L_BKLT_EN
16 H_GND 38 BL_PWR
17 Lane2_N 39 VCC3_3
18 Lane2_P 40 H_GND
19 H_GND 41 SMB_CLK
20 Lane1_N 42 SMB_DATA
21 Lane1_P 43 INTR#
22 H_GND 44 NC
Embedded DisplayPort Pin Layout
144