Supermicro X11SSQ - Page 42

42
Super X11SSQ/-L/-V User's Manual
Power LED
The Power LED connection is located on pins 15 and 16 of JF1. Refer to the table below
for pin denitions.
Power LED
Pin Denitions (JF1)
Pin# Denition
15 +3.3V Stby
16 Ground
HDD LED
The HDD LED connection is located on pins 13 and 14 of JF1. Attach a cable here to indicate
the status of HDD-related activities, including SATA activities. See the table below for pin
denitions.
HDD LED
Pin Denitions (JF1)
Pin# Denition
13 +3.3V
14 HD Active
NIC1/NIC2 (LAN1/LAN2)
The NIC (Network Interface Controller) LED connection for LAN port 1 is located on pins
11 and 12 of JF1, and the LED connection for LAN Port 2 is on Pins 9 and 10. NIC1 LED
and NIC2 LED are 2-pin NIC LED headers. Attach NIC LED cables to NIC1 and NIC2 LED
indicators to display network activities. Refer to the table below for pin denitions.
LAN1/LAN2 LED
Pin Denitions (JF1)
Pin# Denition
9/11 +3.3V Stby
10/12 Ground
Power Button
OH/Fan Fail LED
1
NIC1 Activity LE
D
Reset Button
2
HDD LED
Power LED
Re
set
PWR
3.3V Stby
3.3V
3.3V Stby
3.3V
Ground
Ground
X
X
NIC2 Activity LE
D
3.3V Stby
15 16
1
4
3
2
1. PWR LED
2. HDD LED
3. NIC1 LED
4. NIC2 LED