12
X11SSV-M4F User's Manual
Quick Reference Table
Jumper Description Default Setting
JBR1 BIOS Recovery Pins 1-2 (Normal)
JBT1 CMOS Clear Open (Normal)
JI
2
C1/JI
2
C2 SMB to PCI-E Slots Enable/Disable Pins 2-3 (Disabled)
JPAC1 Audio Enable Pins 1-2 (Enabled)
JPG1 VGA Enable/Disable Pins 1-2 (Enabled)
JPME1 ME Recovery Pins 1-2 (Normal)
JPUSB1 USB Wake Up Pins 2-3 (Disabled)
JVRM1 VRM SMB Clock (to BMC or PCH) Pins 1-2 (Normal)
JVRM2 VRM SMB Data (to BMC or PCH) Pins 1-2 (Normal)
JWD1 Watch Dog Pins 1-2 (Reset)
LED Description Status
LED1 BMC Heartbeat Blinking Green: BMC Normal
LED2 Power LED Solid Green: Power On
Connector Description
AUDIO Front Panel Audio Header
BT1 Onboard Battery
COM1 COM Port (in RJ45)
DVI-A Digital Video Interface (Analog Output Only)
FAN1 ~ FAN3 System/CPU Fan Headers (FAN1: CPU Fan)
I-SATA1 ~ I-SATA4 IntelĀ® PCH SATA 3.0 Ports
I-SGPIO1 Serial Link General Purpose I/O Header
J16 NIC3 Activity LED Header
J17 NIC4 Activity LED Header
JD1 Speaker Header
JF1 Front Control Panel Header
JGPIO1 General Purpose I/O Header
JIPMB1 4-pin External I
2
C Header (for an IPMI card)
JL1 Chassis Intrusion Header
JP1 4-pin Power Connector for HDD
JPCIE1 x16 CPU PCI-E 3.0 X16 Slot
JPI
2
C1 Power Supply SMBus I
2
C Header
JPW1 24-pin ATX Power Connector
JPW2
12V 8-pin CPU Power Connector (To provide alternative power for special enclosure
when the 24-pin ATX power is not in use.)
JSD1/JSD2 SATA DOM Power Connectors
JSMB1 System Management Bus Header
To Next Page
Loading...
