Supermicro X11SSV-M4F - Page 33

33
Chapter 2: Installation
Power Button
The Power Button connection is located on pins 1 and 2 of JF1. Momentarily contacting both
pins will power on/off the system. This button can also be congured to function as a suspend
button (with a setting in the BIOS - see Chapter 4). To turn off the power in the suspend
mode, press the button for at least 4 seconds. Refer to the table below for pin denitions.
Power Button
Pin Denitions (JF1)
Pin# Denition
1 Signal
2 Ground
Reset Button
The Reset Button connection is located on pins 3 and 4 of JF1. Attach it to a hardware reset
switch on the computer case to reset the system. Refer to the table below for pin denitions.
Reset Button
Pin Denitions (JF1)
Pin# Denition
3 Reset
4 Ground
1. Power Button
2. Reset Button
Power Button
OH/Fan Fail LED
1
NIC1 Activity LE
D
Reset Button
2
HDD LED
Power LED
Re
set
PWR
3.3V Stby
3.3V Stby
3.3V Stby
3.3V Stby
Ground
Ground
PWR Fail LED
NIC2 Activity LE
D
3.3V Stby
15 16
3.3V Stby
1
2