Notes
• Graphics shown in this quick reference guide are for illustration only. Your components
may or may not look exactly the same as drawings shown in this guide.
• Refer to Chapter 2 of the User Manual for detailed information on jumpers, connectors,
LED indicators, memory support and CPU/motherboard installation instructions.
MNL-2263-QRG-10a
© 2020 Supermicro Computer Inc. All rights reserved. Reproduction of this document whether in part or in whole is strictly prohibited without Super-
micro's written consent. All Trademarks are property of their respective entities. All information provided is deemed accurate at the time of printing;
however, it is not guaranteed.
A. DisplayPort 1.4 F. USB3: USB 3.2 Gen1 (Type A) K. 2.5Gb LAN Port 2
B. HDMI Port 2.0a G. USB2: USB 3.2 Gen1 (Type A) L. USB9: USB 3.2 Gen2 (Type A)
C. VGA Port (for IPMI, X12SCA-F only) H. 1Gb LAN Port 1 M. USB8: USB 3.2 Gen2 (Type A)
D. Digital Video Interface (DVI-D) I. USB7: USB 3.2 Gen2 (Type A) N. Center/LFE Out
E. Dedicated IPMI LAN Port
(X12SCA-F only)
J. USB6: USB 3.2 Gen2 (Type C) O. Surround Out
P. S/PDIF Out
Q. Line In
R. Line Out
S. Mic In
T. UID Switch (X12SCA-F only)
X12SCA-F
Power Button
OH/Fan Fail LED
1
NIC1 LED
Reset Button
2
Power Fail LED
HDD LED
Power LED
#3~4
#1~2
Vcc
Vcc
Vcc
Vcc
Ground
Ground
1920
Vcc
X
Ground
NMI
X
Vcc
NIC2 LED
Front Control Panel (JF1)
CPU Installation
Heatsink Installation
Back Panel I/O Connectors
A C
E H K
N Q
B D F
G
I
J
L
M
O R T
P S
Pin 1
1
2
3
4
Push down
Lock
Unlock
To Next Page
Loading...
