EasyManua.ls Logo

SUPERNOVA E3 Series - Information E3 PRO; E3 PURE; E3 TRIPLE; For All Front Lights; E3 PRO; E3 PURE

SUPERNOVA E3 Series
17 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7 DE // EN6 DE // EN
FOR ALL FRONT LIGHTS
> Never use a high-pressure hose to clean the light. The lens is held in place with a
spring. The pressure of a water jet would push it back - water will get into the
sealed housing and cannot get out again.
> To ensure the correct function and to preserve the longevity of the front light only
Supernova rear lights should be used.
> Always connect the front and rear light with the 2-core wire (no mass connection
to the frame!).
> Please note: Any kind of short circuit will severely impair the function of the light.
Please always insulate unused cable ends of the front light if the rear light is not
installed.
> The fully automated front and tail stand light shines for 4 minutes.
> The cable exits have to point downwards to keep the housings waterproof.
E3 PRO
> With its special beam shape, the Terraflux 2 hybrid lens offers both, an excellent
illumination at night as well as a great daytime running light for your permanent
safety.
E3 PURE
> With its special beam shape, the Terraflux 2 hybrid lens offers both, an excellent
illumination at night as well as a great daytime running light for your permanent
safety.
> Additional USB chargers cannot be connected with the dynamo because there is
not enough energy left for both - the E3 PURE 3 and USB power.
E3 TRIPLE
> Please note! Not road legal; will blind oncoming traffic!
> Automatic activation of the two additional LEDs from 10-15 km/h (6.5- 9 mph).
> No activation of the two additional LEDs if an overvoltage protection or a power
hungry rear light of another brand is used.
INFORMATION E3 PRO / E3 PURE / E3 TRIPLE EN
7
DE // EN
INSTALLATION E3 PRO / E3 PURE / E3 TRIPLE DE // EN
Schalter // Switch
Schalter-
freies
Design //
Switchless
design
Schwarze Kabel für
Dynamoanschluss //
Black cables for
dynamo connection
Schwarze Kabel für
Dynamoanschluss //
Black cables for
dynamo connection
Blau/Rotes Kabel für
Rücklichtanschluss
(Infos S. 13-14) //
Blue/Red cable for tail
light connection
(more info: p. 13-14)
E3 PRO
E3 TRIPLE
E3 PURE
Blau/Rotes Kabel für
Rücklichtanschluss
(Infos S. 13-14) //
Blue/Red cable for tail
light connection
(more info: p. 13-14)
+
+

Related product manuals