4
4. The voice tag will be played back to you and then the phone will dial the
number automatically.
Redial (For Handsfree Profile Phones only):
Press the MFB (6) button for 3 seconds. The last dialed number will be
redialed.
Reject a Call (For Handsfree Profile Phones only):
During the ring tone, press and hold the MFB (6) button for 3 seconds or short
press the End/Reject (7) button. The incoming call will be rejected.
Volume Setting:
Increase or decrease the volume by pressing the Volume Up (2) or Volume
Down (3) button. Press repeatedly until the desired level is reached. A beep
will be heard as lowest and highest levels are reached.
To transfer Audio from the Handsfree kit to the Phone:
Simply turn off the handsfree kit by pressing the On/Off (8) button for 3
seconds and the audio will automatically be transferred to the phone.
To Transfer Audio from the Phone to the Handsfree kit:
Press the MFB (6) for 1 second and the audio will automatically be transferred
to the handsfree kit.
Note: For some phones, you may need to accept a connection prompt on the
phone before automatic transfer takes place.
H. Advanced Functions
a. Call waiting
Important: Before using this feature, make sure that your phone and the
phone network both support call waiting.
If there’s a second incoming call, a beep will be heard from the SUPERTOOTH
BUDDY.
To end the current call and accept the second incoming call
Short press the MFB (6) button will end the current call and accept the
second call. The audio for the second call will automatically be heard
through the handsfree kit.
Note: Call waiting is not available if two phones are connected (MultiPoint).
b. Multi-Point Function
The SUPERTOOTH BUDDY can simultaneously connect to 2 Bluetooth
devices. The SUPERTOOTH BUDDY is active on both mobile phones. User
To Next Page
Loading...
