Supore LE-310P - User Manual

AUTO LENS EDGER
LE-300/LE-310/310P/320/400/420
Operation Manual
REV.20170608

Summary

Security Information

Introduction of Security Symbols

Environment of Use

Operational Attention and Warnings

Control Panel Overview

LE-300;310;310 P Control Panel

Details the control panel layout and functions for LE-300/310/310P.

LE-320;400;420 Control Panel

Details the control panel layout and functions for LE-320/400/420.

Lens Type and Bevel Selection

Installation and Setup

Main Machine Installation

Steps for installing the main unit on a platform.

Water Tank and Pipe Installation

Instructions for connecting the water tank and pipes.

Operation Procedures

Operation Preparations

Fitting Templates

Clamping Lens

Steps for securing the lens in the chuck.

Selecting Lens Type

Fixing the Lens

How to properly mount the lens onto the machine.

Operation Procedures

Selecting Beveling Mode

Advanced Operation Procedures

Starting the Edging Process

Instructions on how to initiate the lens edging process.

Wheel Calibration and Types

Machine Calibration

LE-300;310;400 Calibration

Step-by-step guide for calibrating LE-300/310/400 models.

LE-320;420 Calibration

Step-by-step guide for calibrating LE-320/420 models.

Maintenance and Moving

Routine Maintenance Tasks

After-Sales Service and Troubleshooting

Troubleshooting Common Issues

Specific Troubleshooting Scenarios

Supore LE-310P Specifications

General

Brand	Supore
Model	LE-310P
Category	Edger
Language	English