To Next PageTo Next Page
Need help?Do you have a question about the Supra WLR-510 and is the answer not in the manual?
Company information and contact details for the product issuer.
Instructions on how to use the WLAN repeater and its importance.
Explanation of symbols and signal words used in the operating instructions.
Specifies the intended private use of the WLAN repeater and prohibits commercial use.
Provides crucial safety warnings regarding electrocution hazards and device operation.
Safety guidelines for children and persons with reduced abilities or lack of experience.
Highlights risks of material damage due to incorrect use or environmental factors.
Explains what damages are not covered by warranty and are chargeable.
States that the device is intended for internal use only; external use is not permitted.
Instructions for unpacking the WLAN repeater and removing protective materials.
Lists the items included in the product packaging for verification.
Guides through the initial setup and configuration of the WLAN repeater.
Details on how to set up and use the WLAN repeater in repeater mode.
Step-by-step guide for configuring the WLAN repeater via the Web Interface.
Instructions on how to use the WLAN repeater in Client mode.
Steps to configure and use the WLAN repeater as an Access Point.
Detailed instructions for installing the WLAN repeater in Access Point mode.
Explains how to use the repeater in Access Point mode for network connectivity.
Detailed steps for installing the WLAN repeater in Access Point mode via web browser.
Guide to establishing a wireless connection using the WPS button in repeater mode.
Manual setup process for the WLAN repeater using the Web interface.
Instructions for accessing and logging into the WLAN repeater's Web interface.
Describes the information available on the start page of the Web interface.
Details on how to view operating time, mode, and Wi-Fi/LAN status in the interface.
Guides users through setup processes like Repeater/Client or Access Point modes.
Steps for configuring the repeater in Repeater and Client modes via the assistant.
Steps for configuring the Access Point mode, including security and encoding.
Instructions on configuring WPS settings, including PIN code usage.
Details on advanced WLAN settings like radio status, SSID, and encoding.
Information on how to set or change the password for the Web interface.
Explains how to save, reinstate, or reset device settings using the configuration tool.
Instructions on how to upgrade the firmware of the WLAN repeater.
Steps for performing a manual reset of the repeater to its default settings.
Status of 2.4G and 5G Wi-Fi signal LEDs, including reception levels.
Indicates WLAN network status, data transmission, or if the wireless network is off.
Indicates power status and WPS connection activity.
Shows the status of the LAN connection and data transmission.
Details the EC Declaration of Conformity and relevant EU directives for the product.
Provides instructions on how to properly store the WLAN repeater when not in use.
Warns about electrocution hazard due to the device getting hot during operation.
Warns about the danger of short circuits caused by water entering the housing.
Warns about potential device damage from incorrect cleaning methods.
Instructions for disposing of the product's packaging materials separately.
Guidance on the proper disposal of the used device according to regulations.
Details the software license governed by the GNU General Public License.
Instructions and fields for filling out the warranty card with user and malfunction details.
Outlines the terms and conditions of the ALDI warranty, including period and coverage.
General| Wireless Standards | IEEE 802.11b/g/n |
|---|---|
| Wireless Speed | Up to 300Mbps |
| Frequency Band | 2.4GHz |
| Ports | 1 x 10/100M RJ45 |
| Security | WPA, WPA2 |
| Modes | Repeater, AP |
| Operating Temperature | 0°C - 40°C |
