1. Remove all packing material. Recycling is recommended
2. Carefully remove the hand dryer from the shipping carton.
3. Use cauon when removing the casing. The casing may have sharp edges/ corners which may cut
or cause harm.
4. Inspect carefully for any damage that may have occurred during transit. Check for any loose,
missing or damaged parts. If the hand dryer is damaged, promptly inform the shipper or dealer
where you purchased it.
WARNING - TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK, OR INJURY TO PERSONS, OBSERVE
THE FOLLOWING:
• Use this unit only in the manner intended by the manufacturer. Manufacturer is not
responsible for damage caused by misuse or defecve installaons.
• The instrucons contained within the installaon template enclosed must be followed carefully when
installing this unit. Failure to accurately follow the instrucons may result in the incorrect operaon of
this unit, damage to property and/or personal injury.
• Installaon work and electrical wiring must be carried out by qualied person(s) in accordance with all
applicable codes and standards.
• When cung or drilling into wall or ceiling, do not damage electrical wiring and other hidden ulies.
• This unit has been designed for indoor use only, protected from water, sun and extreme temperatures.
Do not use it outdoors or close to moisture and heat generators.
• This appliance can be used by children and persons with reduced physical, sensory or mental capabilies
or lack of experience and knowledge if they have been given supervision or instrucon concerning use of
the appliance in a safe way and understand the hazards involved. Do not allow children to play with the
appliance or carry out cleaning and user maintenance on the hand dryer.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly
qualied persons in order to avoid a hazard.
Hex Key
Wall Mounng
Anchors
Flat cable clamp
and screw
Main Unit
Standard items included with the hand dryer are:
4
To Next Page
Loading...