SUPREME Diamond - Operation and Maintenance; Regular Maintenance; Periodical Deep Clean

1. Non touch operaon.
2. Shake excess water from hands
3. Place hands under the outlet to start operaon.
4. Slowly move hands back and forth through the hand dryer.
5. Sensor has blue light assist.
6. Stops automacally aer hands are removed.
If there is an electrical or motor problem a blue LED will blink when
hands are placed under sensor.
REGULAR MAINTENANCE
Regularly clean the outer casing using a so, damp cloth to gently wipe away any dirt.
CAUTION: Never use abrasives or chemicals to clean the cover. Do not soak.
PERIODICAL DEEP CLEAN
Cleaning and maintenance must be performed by qualied electrical personnel.
1. Disconnect the electrical supply.
2. Use the hex key to remove the two cover security screws.
3. Remove the cover.
4. Clean all dust and lint from the interior of the hand dryer.
5. Replace the cover.
6. Wipe the cover with a damp cloth.
CAUTION: Do not overghten the screws.
7