SUPREME SUP10-A240V12 User Manual

Printed in Canada
Printed on 100% recycled paper
2015-03-25
X40233 Rev. A
Models
:
SUPXX-A240V12
SUPXX-A240V20
ADVANTAGE
(ECM MOTOR)
Manufactured by:
Industries Dettson inc.
3400 Industrial Boulevard
Sherbrooke, Quebec - Canada
J1L 1V8
Caution
: Do not tamper with
the unit or its controls. Call a
qualified service technician.
INSTALLER / SERVICE TECHNICIAN:
USE THE INFORMATION IN THIS MANUAL FOR THE INSTALLATION AND
SERVICING OF THE FURNACE AND KEEP THE DOCUMENT NEAR THE UNIT
FOR FUTURE REFERENCE.
HOMEOWNER:
PLEASE KEEP THIS MANUAL NEAR THE FURNACE FOR FUTURE
REFERENCE.

SUPREME SUP10-A240V12 Specifications

General

Brand	SUPREME
Model	SUP10-A240V12
Category	Furnace
Language	English

Summary

SAFETY

1.1- DANGER, WARNING AND CAUTION

Defines hazard levels and symbols used in the manual for safety.

1.2- IMPORTANT INFORMATION

Emphasizes safety regulations and proper installation procedures.

1.3- DANGER OF FREEZING

Provides precautions to prevent pipe freezing during furnace shutdown.

INSTALLATION

2.1- POSITIONING THE FURNACE

Instructions for locating and installing the furnace in a level position.

2.2- CLEARANCES TO COMBUSTIBLE MATERIAL

Specifies required clearances around the heating unit and ducts.

2.3- FURNACE CONFIGURATIONS

Details the different installation orientations: upflow, downflow, and horizontal.

2.4- ELECTRICAL SYSTEM

Describes the furnace's pre-wired electrical system and voltage requirements.

2.5- INSTALLATION OF THE THERMOSTAT

Guidelines for thermostat installation and wiring connections.

2.6- SUPPLY AIR ADJUSTMENTS

Configuration of fan control board for system airflow based on components.

2.7- INSTALLATION OF ACCESSORIES

Instructions for connecting accessories like humidifiers and air cleaners.

OPERATION

3.1- START-UP

Checklist and steps for safely starting up the furnace.

3.2- USE OF MANUAL FURNACE CONTROLS

Explanation of manual controls like HI/LO switch and ON/OFF VENT/FAN switch.

3.3- OPERATING SEQUENCE

Describes how the furnace operates based on thermostat inputs and modes.

3.4- AIRFLOW VERIFICATION

How to verify airflow using temperature and amperage readings.

MAINTENANCE

4.1- AIR FILTER

Recommendations for air filter replacement and cleaning.

4.2- MOTOR LUBRICATION

Information regarding blower motor lubrication.

FURNACE INFORMATION

START-UP RESULTS

Fields to record start-up test results like voltage, current, temperatures.