SUR&R PFT409 User Manual

INCLUDED IN KIT
PART NO. DESCRIPTION PART NO. DESCRIPTION
PFT205 Die – 3/16” (4.75 mm) 45° & DIN PFT340 Punch – 5/16” (8 mm) DIN
PFT210 Die – 1/4” 45° & DIN PFT350 Punch – 3/16” & 1/4” 45° OP2
PFT215 Die – 5/16” (8 mm) 45° & DIN PFT355 Punch – 5/16” x 3/8” 45° OP2
PFT220 Die – 3/8” 45° PFT383 Punch – OP0
PFT305 Punch – 3/16” (4.75 mm) 45° OP1 PFT610 PFT409 Yoke Set Screw Handle
PFT310 Punch – 1/4” 45° OP1 PFT615 PFT409 Yoke
PFT315 Punch – 5/16” (8 mm) 45° OP1 PFT620 PFT409 Yoke Handle
PFT320 Punch – 3/8” 45° OP1 PFT625 PFT409 Hydraulic Handle
PFT330 Punch – 3/16” (4.75 mm) DIN PFT630 PFT409 Case
PFT335 Punch – 1/4” DIN
OPTIONAL (Sold Separately)
PART NO. DESCRIPTION PART NO. DESCRIPTION
PFT245 Die – 3/16” (4.75 mm) 37° PFT260 Die – 3/8” 37°
PFT250 Die – 1/4” 37° PFT325 Punch – 3/16” (4.75 mm) 37° OP2
PFT255 Die – 5/16” 37°
DIES
INCLUDED OPTIONAL
PFT205 PFT245
PFT210 PFT250
PFT215 PFT255
PFT220 PFT260
PUNCHES
INCLUDED
PFT305 PFT335
PFT310 PFT340
PFT315 PFT350
PFT320 PFT355
PFT330 PFT383
OPTIONAL
PFT325
Rev 1 9/21

SUR&R PFT409 Specifications

General

Brand	SUR&R
Model	PFT409
Category	Tools
Language	English

Summary

Included Kit Components

Included Dies

Dies included in the PFT409 kit for various flare types.

Included Punches

Punches included in the PFT409 kit for various flare types.

Included Tool Parts

Essential tool parts like yoke, handles, and case included in the kit.

Optional Parts

Optional Dies

Additional dies available for separate purchase.

Optional Punches

Additional punches available for separate purchase.

Operating Instructions

Tubing Preparation

Ensure tubing end is cut straight and deburred before flaring.

Die and Punch Installation

Select and install the correct die set and punch into the yoke.

Flaring Process

Position tubing, tighten set screw, and operate lever for flaring.

Double Flare Creation

Steps for creating a double flare using the cone-shaped punch.