Surebonder 7760 User Manual

®
FPC Corporation - 355 Hollow Hill Drive - Wauconda, IL 60084
Phone: (847) 487- 4583 Fax: (847) 487-0174
website: www.surebonder.com e-mail: sales@surebonder.com
Read All Safety Rules and Instructions Carefully
Save this manual for Future Reference
1211
Operating Instructions
1”- 2-1/2" 16 gauge Finish Nailer
5/8”- 2” 18 gauge Brad Nailer
5/8”- 1-5/8” 18 gauge 1/4”Crown Stapler
Includes: Allen wrench(2) & pneumatic oil
Model 7760 3 in 1 Nailer/Stapler
WARRANTY
If you have any problems with this tool, please call FPC Corporation toll-free at
1-800-860-3838 before returning it to the place of purchase.
FPC Corporation warrants this product to be free from defects in material and
workmanship, under normal conditions of use and when used in accordance with
FPC operating instructions, for a period of 90 days from the date of purchase by the
user. Within the 90 day warranty FPC at its option shall repair or replace the
product. . The product must be returned at the distributor/user expense, either
within warranty or out. Repaired or replaced products will receive a 60 day
warranty. USER MUST BE USING THE PROPER FASTENERS FOR THIS WARRANTY
TO BE VALID. WARRANTY IS VOID IF INCORRECT TYPE OF FASTENERS ARE USED.
®
Visit us at surebonder.com for our full line of products

Surebonder 7760 Specifications

General

Brand	Surebonder
Model	7760
Category	Nail Gun
Language	English

Summary

Warranty Information

Product Warranty Details

Details the terms and conditions of the product warranty, including duration and voiding conditions.

Important Safety Warnings

General Safety Precautions

Essential safety guidelines to prevent injury and equipment damage during operation.

Air Supply and Setup

Air Supply Requirements

Specifies the type of air pressure and components required for safe and effective tool operation.

Troubleshooting Guide

Operation and Specifications

Fastener Loading Procedures

Provides step-by-step instructions for loading finishing nails, brad nails, and staples.

Operational Modes and Adjustments

Mode of Operation

Explains how the tool operates, including safety mechanisms and trigger functions.

Adjusting Air Pressure

Testing the Nailer

Maintenance and Storage

Lubrication Guidelines