DIP 6:
DIP 7/8:
00: Disable port based priority. (default)
01: Set port 5,13 as high priority ports.
10: Set port 5,6,13,14 as high priority ports.
11: Set port 5~8,13~16 as high priority ports.
DIP 9:
1: Enabled
0: Disabled (default)
DIP 10:
1: Enabled
High Priority: if pattern bits TOS/DS[0:5] =(EF) 101110;(AF)
001010, 010010,011010, 100010;(Network Control)
11x000;Low Priority: if TOS/DS = other codepoint values.
0: Disabled (default)(DS = Differentiated Service)
9
Note:1. If any physical port of a trunk group has a link down,
a fault condition has happened on this trunk group.
Enable Port Trunk 2:
Enable Port Trunk 3:
Enable Port based priority QoS function:
Enable 802.1p VLAN Tag priority based QoS function:
Enable TCP/IP TOS/DS (DiffServ) based QoS function:
2. After you change the status of any DIP, you have to restart
the switch again.
DIP 5:
2-Year Warranty2-Year Warranty
2-Year Warranty2-Year Warranty
2-Year Warranty
The manufacturer warrants to the original consumer /purchaser free from defects
in materials or workmanship for limited time from the original factory shipment
date.
KEEP THIS STUB FOR YOUR RECORDS
Date Purchased:
Where Purchased:
From Whom:
Serial:
Model:
TO:
ATTN:
Place
Stamp
Here
WARRANTY REGISTRATION CARDWARRANTY REGISTRATION CARD
WARRANTY REGISTRATION CARDWARRANTY REGISTRATION CARD
WARRANTY REGISTRATION CARD
Please complete this form and return it within 10
days of purchase to validate the warranty
Name/Title:
Company:
Address:
Tel. No.: Signature:
Purchase Model: Serial No.:
Purchase from:
Address:
Date of Purchase:
MANUFACTURER DISTRIBUTOR
1: Enable port trunk 2 which consists of ports 1,2,9,10
1: Enable port trunk 3 which consists of ports 3,4,11,12
0: Disable port trunk 2
0: Disable port trunk 3
To Previous Page
Loading...
Need help?
General
