Surecom SR-629 User Manual

Features:
Repeater controller for 2 of radio
Confirm Power Switch turn lfet and right for Power ON
Build in Battery ,work up to 48hours
2 mode of Duplex Mode Cross Band Mode
Radio Get More Noise
Please set CTCSS or CTCSS for repeater Operation
Please change radio frequency
Battery Charger or Battery defective,you need to be replaced
Specifications:
Model:
SR-629
Radio Problem and Radio speaker volume level too low
Audio :
Analog
Build-in Battery :
Li-ion 3.7V 600MAH
Please contact : www.surecom.com.hk
Power in:
5V (micro usb)
PLUG in:
3.5mm x17mm 4 pole
LED:
2 for A/B CH
Size :
70*90*28 mm
Net Weight : 68g
Battery Life : 24-48 Hours
Package
1x SR-629
1x English Instructions
1x USB Charger Cable
1x USB Power Supply
How to Connect Radio :
A Connect to Radio 1 (Cable optional)
B Connect to Radio 2 (Cable optional)
USB connect to Charger cable
Battery charger :
Connect the charger to SR-629 USB,the red light bright
when start charging ,and green light bright when battery
it is fully.
Turn on / off / mode select
Power off when mode switch is center.
Mode 1 and Power ON when mode switch is left.
Mode 2 and Power ON when mode switch is right
MODE 1
Radio A is received , control Radio B is TX
MODE 2
Radio A is received , control to Radio B is TX
Radio B is received , control to Radio A is TX
No Reaction
Customers
Service
PROBLEM SOLUTION
NO SYSTEM
TX and RX ERROR
Insuffcient Charge
Repeater controller
MODEL NO. SR-629 V1.03
SR-629
2 in 1 Duplex Repeater Controller

Surecom SR-629 Specifications

General

Brand	Surecom
Model	SR-629
Category	Controller
Language	English

Summary

Product Overview and Specifications

Key Features

Highlights the controller's capabilities, including dual radio support and duplex modes.

Technical Specifications

Details technical aspects like model, battery, power, dimensions, and battery life.

Basic Operation and Setup

Radio Connection Guide

Instructions for connecting radios to the repeater controller, including optional cables.

Battery Charging Instructions

Explains how to charge the controller's internal battery using the provided cable and power supply.

Power and Mode Selection

Describes how to turn the device on/off and select between different operational modes.

Mode Operation Details

Mode 1 Detailed Operation

Explains Mode 1 operation with diagrams showing A (RX) to B (TX) connection and antenna separation.

Mode 2 Detailed Operation

Explains Mode 2 operation with diagrams showing A (RX) to B (TX) and B (RX) to A (TX) configurations.

Advanced Configurations

Illustrates setups with duplexers, filters, and mixed digital/analog radio communication.

Troubleshooting and Accessories

Troubleshooting Common Issues

Provides solutions for common problems like 'NO SYSTEM', 'TX and RX ERROR', and 'Insufficient Charge'.

Controller Malfunction Guide

Addresses issues where the controller might not be working, suggesting customer service contact.

Optional Accessories and Cables

Lists compatible optional accessories and specific connection cables for various radio models.