Do you have a question about the Surefire ST07 and is the answer not in the manual?
Procedure to connect a tailcap and remote tape switch by inserting the connector until it clicks.
Procedure to disconnect a remote tape switch from a tailcap by twisting and pulling the connector.
Momentary activation via pressure pad, constant-on via pushbutton.
Momentary activation with bump for weapon light, without bump for auxiliary device.
Momentary activation via pressure pad.
Momentary activation by partial press, constant-on by clicking.
Requires a remote tape switch for operation.
Toggle switch for enabling/disabling; momentary or constant-on activation.
Attach to picatinny rail edges, use tie wraps for added security.
Clean site, apply Velcro backing, and adhere switch.
Hook hinges to the WeaponLight hinge pin.
Procedure to connect a tailcap and remote tape switch by inserting the connector until it clicks.
Procedure to disconnect a remote tape switch from a tailcap by twisting and pulling the connector.
Momentary activation via pressure pad, constant-on via pushbutton.
Momentary activation with bump for weapon light, without bump for auxiliary device.
Momentary activation via pressure pad.
Momentary activation by partial press, constant-on by clicking.
Requires a remote tape switch for operation.
Toggle switch for enabling/disabling; momentary or constant-on activation.
Attach to picatinny rail edges, use tie wraps for added security.
Clean site, apply Velcro backing, and adhere switch.
Hook hinges to the WeaponLight hinge pin.
| Compatibility | SureFire Weapon Lights |
|---|---|
| Material | Polymer |
| Color | Black |
| Activation | Momentary-on |
| Weight | 1.5 oz |
| Mounting | Hook-and-loop straps |
Loading...