EasyManua.ls Logo

SUREHATCH SH2000 COMBO - Automatic Egg Turning Process

SUREHATCH SH2000 COMBO
23 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Egg Turning:
Your Surehatch Incubator is automatically set to turn the eggs every hour.
When loading eggs into the incubator you can disengage the egg turner motor by pressing the
clutch button.
Remember, eggs must be in the setter trays for the first 18 days and must be moved by hand to the
hatcher on the morning of day 18. Chicks will start hatching from day 21/22.
Disengaging the egg turner motor (For when you want to load eggs)
If you want to load eggs and the egg trays are angled at their 45 degree angle, you can disengage the
turner motor in order to make the trays horizontal.
How to disengage the turner motor:
Step 1:
Flip the EGG TURNER switch to OFF (Located on the front control panel)
Step 2:
Open the incubator door
Step 3:
Press the clutch button on the turner motor as shown below (Round Grey “Push” button).
If you press this button the trays will be able to move freely See picture below
Step 4:
Make sure you are holding the egg rack with your one hand while pressing the clutch button.
BE CAREFULL when pressing the clutch button as the egg trays will move to a center position.
Turner Motor with
GREY Clutch PUSH
button