3. Set up - Features
Setting the time
You will need to set your preferred date Format first
Go to Main menu > Features > Setup > Date/Time > Date Format > Select
Choose dd/mm/yy or mm/dd/yy
Then press Back.
Set Correct Time – Use the up/down arrows to change the displayed time to the
correct time. Use the left/right arrows to move between hours and minutes. Press
the Save soft key to save the correct time.
Setting the measurement unit - Metres or Yards
Go to Main menu > Features > Setup > Units > Metres/Yards > Select
Choose Metres or Yards. Press Back to go to main menu
Scoring - Yes or No
Go to Main menu > Features > Setup > Scoring > Select
Choose On or Off. Press Back to go to main menu
Backlight – how to alter
Go to Main menu > Features > Setup > Backlight > Select
Press the appropriate soft key to set the time the backlight will stay at high intensity.
Use the down arrow to sequence through the available options. If Off is selected the
backlight will turn off after the selected time. If Low is selected the backlight will go to
low intensity after the selected time. For best results and battery capacity set the time
to 40 sec and Low.
Press Back to go to main menu.
To Next Page
Loading...
