SURGE SG60043-44 - User Manual

To Next Page

SG60043-44 Firmware Update Instructions

Required Equipment

• Computer

• USB - USB-C data transfer cable (cable included with device is compatible)

• SwitchPad Pro Controller

• Firmware Update File

Update Instructions

Step 1

Unzip & extract the provided folder

Step 2

Plug the USB-C data cable into your wireless controller. Press and hold the L3 Button

(click left stick in) and connect the USB cable to the computers USB port, release L3 after

connecting to computer.

Need help?

Do you have a question about the SURGE SG60043-44 and is the answer not in the manual?

Summary

Unzip and extract the provided folder containing the firmware update files.

Hold L3 and connect the controller via USB-C to the computer, releasing L3 after connection.

Run the firmware update software by double-clicking the specified update file.

Follow the on-screen prompts and click 'OK' to finalize the firmware upgrade.

Reset the controller, then follow the synchronization guide to reconnect it.

General