Do you have a question about the Surgically Clean Air Cascade White and is the answer not in the manual?
Detach the front panel from the air purifier to access internal components.
Pull and turn two clips to remove the Pre-Filter for cleaning.
Use a vacuum cleaner to remove dust from both sides of the Pre-Filter.
Use the two handles to pull the electronic cell straight out of the air purifier.
Place the electronic cell in a large container like a shower stall or sink for washing.
Spray the electronic cell thoroughly with hot water.
Spray with a de-greaser like soapy water or a mild cleaning solution.
Rinse the electronic cell thoroughly with hot water for a second time.
Let the electronic cell dry for at least 4 hours on a 45-degree angle.
Insert the dried electronic cell back into the air purifier.
Insert the cleaned Pre-Filter back into the air purifier.
Reattach the front panel to the air purifier.
Press the 'POWER' button for three seconds until it beeps to reset.
| Product Type | Air Cleaner |
|---|---|
| Model | Cascade White |
| Color | White |
| Technology | Multi-stage filtration |
| Filtration Stages | 6 |
| Pre-filter | Yes |
| Activated Carbon Filter | Yes |
| UV-C Light | Yes |
| Coverage Area | Up to 1000 sq ft |
| Filter Life | 6-12 months |
| HEPA Filter | Yes |
Loading...