Do you have a question about the Surron Light Bee QL3000DY and is the answer not in the manual?
Brand | Surron |
---|---|
Model | Light Bee QL3000DY |
Category | Motorcycle |
Language | English |
Location and type of riding warning label.
Location and type of battery warning label.
Location of the controller label on the bike.
Location of the frame plate with bike details.
Location of the Vehicle Identification Number (VIN) label.
Conditions to avoid or be cautious in.
Lists persons prohibited from riding the motorcycle.
Essential checks before operating the electric motorcycle.
Guidance for safe operation while riding.
Guidelines for operating and using the motorcycle correctly.
Full power mode for trail and off-road riding.
Functions of the speedometer switch for speed display.
Mode limiting power for beginners and long range.
Steps to install the handlebars on the motorcycle.
Steps to install the headlight onto the front fork.
Guide for installing front brake and throttle controls.
Steps for routing and securing throttle cables.
Procedure for removing and installing the front wheel.
Steps to mount the front number plate.
Guide for installing the front fender.
How to use the brake levers to slow down and stop the bike.
Procedures for safely parking the motorcycle.
Essential checks and preparations before riding.
Overview of bike operation and system status indicators.
Operating parameters related to temperature and battery.
Guidance on riding the bike in water and its IP ratings.
Instructions for using the portable charger.
Safety guidelines and precautions during charging.
Diagnosing and resolving issues with the motor not powering on.
Troubleshooting issues related to speed display or maximum speed.
Identifying causes for reduced riding range on a single charge.
Resolving charger and battery display issues.
Troubleshooting common charger malfunctions.
Diagnosing and fixing unusual noises during riding.
Addressing miscellaneous faults not covered elsewhere.
Inspection points for various bike components.
Verifying the condition of operational components like suspension and brakes.
Inspecting tire condition, wear, and pressure.
Procedures for checking battery voltage and appearance.
Guidelines for using the charger and charging the battery.