Need help?Do you have a question about the Survivor MMR-88 DAB and is the answer not in the manual?
Battery| battery capacity | 850 mAH |
|---|---|
| battery type | rechargeable Lithium-ion |
Power| dynamo charging | to rechargeable Lithium battery |
|---|---|
| solar panel charging | to rechargeable Lithium battery |
| audio output | 400 mW |
Ports & Interfaces| dc in socket | Micro USB 5V 500 mA |
|---|---|
| dc out socket | USB Type A 5V 300 mA |
| earphones jack | 3.5 mm, Stereo, 32 ohm Impedance |
Details the buttons and controls located on the front of the radio.
Explains the LCD display and status indicators for charging and battery level.
Describes connection ports, antenna, dynamo, and battery access on the sides/rear.
Recharges the radio using a USB to Micro USB cable connected to a power source.
Recharges the battery by rotating the dynamo power handle.
Scans the entire DAB network to find available stations.
Manually tunes the radio to specific DAB channels.
Adjusts dynamic range for clearer audio in noisy environments.
Selects how DAB stations are listed (Alphanumeric, Ensemble, Valid).
Removes unavailable or old DAB stations from the list.
Manually set or automatically update the clock and date.
Set the clock display to 12 or 24 hour format.
Adjust the contrast level of the display for better legibility.
Configure the radio's user interface language.
Performs a factory reset to erase all user settings.
Information on how to update the radio's software.
Displays the current software version installed in the radio.
Manually tune to FM stations by adjusting frequency in 50KHz steps.
Automatically searches for FM stations with sufficient signal strength.
Select 'Local' or 'Distant' to adjust sensitivity for finding FM stations.
Force FM audio to 'Mono' to reduce hiss on weak signals.
Browse and select previously stored DAB or FM radio stations.
To Next Page