1. Safety instructions
WARNING!
Permitted operating parameters!
Observe the permitted operating parameters, any
operation exceeding this parameters can lead to
malfunctions and may lead to damage on the
instrument or the system.
• Do not exceed the permitted operating parameters.
• Make sure the product is operated in its permitted limitations.
• Do not exceed or undercut the permitted storage and operation
temperature and pressure.
• The product should be maintained and calibrated frequently, at
least annually.
General safety instructions
• It is not allowed to use the product in explosive areas.
• Please observe the national regulations before/during installation
and operation.
Remarks
• It is not allowed to disassemble the product.
ATTENTION!
Measurement values can be affected by malfunction!
The product must be installed properly and
frequently maintained, otherwise it may lead to
wrong measurement values, which can lead to
wrong results.
Storage and transportation
• Make sure that the transportation temperature of the device is
between -20°C... 50°C.
• For transportation it is recommended to use the packaging which
comes with the device.
• Please make sure that the storage temperature of the device is
between -20°C... 50°C.
6 S 551