Sutron 8310 - Page 125

Sutron Corporation 8310 & 7310 Users Manual 8800-1125Rev. 2.7 (BETA) 4/16/2014 pg. 125
Pause 1.0
Branch USER-1
Label DTMF-2
AckAlarms
SpeakPhrase Alarm
SpeakPhrase Acknowledge
SpeakPhrase Thank you
Pause 1.0
Branch USER-1
Label DTMF-3
SpeakPhrase Thank you
SpeakPhrase Please call again
Hangup
Label DTMF-ANY
Branch USER-1
Station Setup/Communications/LAN
The LAN menu configures the 8310 to make alarm transmissions using TCP/IP (Ethernet) as
shown below.
LAN
Enable Yes
MasterID BASE
URL1
Type1 Off
UserName1
Password1
Port1 23
URL2
Type2 Off
UserName2
Password2
Port2 23
URL3
Type3 Off
UserName3
Password3
Port3 23
SendToAll Yes
TxNormalRate 00:00:00
TxAlarmRate 00:00:00
End LAN
The following sections document the fields.
Enabled
Enabled determines whether or not the 8310 will send alarms via the LAN. The default setting is
No, meaning that no alarms will be sent. With the setting of Yes, the user can specify up to 3
destinations for an alarm. For each type alarm destination, the user will specify the URL, TYPE,