Sutron Corporation 8310 & 7310 Users Manual 8800-1125Rev. 2.7 (BETA) 4/16/2014 pg. 133
LogFile
This property specifies the log file to which to log the record data.
Interval and Time
These two properties define the schedule of the data to log. You will normally set this schedule
and the schedule of all measurements logged within the record to be the same. However, if the
schedules differ, the data measured closest to the record’s schedule will be logged.
Separator
The Separator property defines the string to use in between each field when formatting the
record for output to the log. The separator may be multiple characters.
HangingSeparator
The HangingSeparator property determines whether to terminate the formatted output with a
separator character. For example, if the property is checked, and the separator character is a
comma (‘,’), the logged data will have a comma at the end, as well as between all fields. If the
property is not checked, no comma will appear at the end of the logged data. This property is
most useful in ensuring the output is compatible with automatic parsing logic used after the log
is downloaded.
Fields (n)
Selecting this item will take you to a list of the measurement outputs that have been assigned as
fields for this record, i.e., assigned as values to include in the record. You can update each field’s
sequence and format, as desired from this menu.
Station Setup/Users
Adding one or more users can be a useful tool for restricting privileges to different people. A
user can have Setup privileges, with full access to see and change measurement setup
properties, or they can be a Retrieval user, having only access to view and download log files. If
someone logged in as a Retrieval user tries to access something they need to have Setup
privileges for, the 8310 will prompt them to log in as a setup user. Logging in to the 8310 also
places an entry in the system log, making it possible to see who was logged in at any time.
After selecting Add User, the following settings will appear.
User name
Choose a user name. User names are not case sensitive. Only numbers and letters are
acceptable; symbols are not allowed.
Password
Choose a password. Passwords are not case sensitive. Only numbers and letters are acceptable;
symbols are not allowed.
User group
Choosing Setup lets a user have full access to see and change measurement properties, view the
logs, use the Diagnostics menu, and perform any other setup changes.
Selecting Retrieval will limit the user to only viewing and downloading the logs. A Retrieval user
cannot change or even see the measurement setups and cannot enter the Diagnostics menu.
To Next Page
Loading...
