Sutron Corporation 8310 & 7310 Users Manual 8800-1125Rev. 2.7 (BETA) 4/16/2014 pg. 47
Note that the hint suggests pressing RIGHT to view the log. You can get to the logged data from
here as well as from the main menu and several other menus in the 8310.
Viewing Logs
With one of the outputs selected in the main menu (e.g. M2.O1) or Diagnostic/Outputs menu,
pressing RIGHT will allow the viewing of the data in the log (as the hint suggests). You can also
view the logs by using the Logged data item in the main menu.
Logged Outputs - ? for Help
09/24/2010 15:00:00 VBAT 13.81 G
09/24/2010 15:15:00 VBAT 13.69 G
09/24/2010 15:30:00 VBAT 13.81 G
09/24/2010 15:45:00 VBAT 13.81 G
09/24/2010 16:00:00 VBAT 13.81 G
09/24/2010 16:15:00 VBAT 13.69 G
09/24/2010 16:30:00 VBAT 13.81 G
09/24/2010 16:45:00 VBAT 13.81 G
Once in the log, you can use the arrow keys to navigate up and down through the data. Pressing
“?” displays help showing special keys to quickly move through the log.
Special keys for viewing logged data:
space - Page Down backspace - Page Up
b - Beginning e - End
h - Hour+ H - Hour-
d - Day+ D - Day-
w - Week+ W - Week-
m - Month+ m - Month-
y - Year+ Y - Year-
Press Enter to continue:
Diagnostics
Diagnostics are selected from the main menu. The diagnostic menu items give quick navigation
to look at all the inputs, outputs, communications and status of the system. The Diagnostic
menu also includes SDI tools.
Diagnostics
Communications (3) >
Inputs (3) >
Outputs (3) >
I/O Modules (3) >
SDI Tools >
System Status >
Basic Status: RUN
Selftest
Clear Cal Data
Debug to System Log No
Upgrade Firmware
Exit 8310 application
End Diagnostics
To Next Page
Loading...
