Sutron 8310 - Main Menu Structure

Sutron Corporation 8310 & 7310 Users Manual 8800-1125Rev. 2.7 (BETA) 4/16/2014 pg. 55
Main Menu
The main menu for the 8310 displays important operational information and is the starting point
for all 8310 users. The terminal version of the menu is shown below. Note that this menu
shows the station name, date and time, recording status, data for selected sensors, and provides
navigation into the logs, setup, diagnostics, etc. The main menu will display an added first line
“Errors present” if there are errors that require user attention.
Sutron 8310: Main Menu
Station GreenRiver 09/24/2010 13:56:34
Recording is ON+TX 9 Meas Active
Alarm Status: NORMAL
Sending Alarm Txs: VOICE2:
M1.O1*: TEMP > 23.971 C G
M2.O1: VBAT > 13.25 G
M3.O1: VBAT_HR > 0.00 U
M4.O1*: AirTemp > 23.53 G
M5.O1: RelHumid > 46.20 G
M6.O1*: Stage > 9.95 G
M7.O1: DewPoint > 18.44 G
M8.O1: testdata > 25.46 G
M9.O1: Stage > 0.00 U
Logged Data >
Station Setup >
Terminal Operations >
Diagnostics >
End Main
A short description of each item in the main menu is provided below. Detailed information on
each item can be found in separate headings with names identical to the item.
Station Name/Date/Time
The user selected name is displayed along with the current date and time. The name is used to
uniquely identify the 8310 to the user and is also used in various reports and communications.
The date is in MM/DD/YYYY format and the time is in 24 hour format. The time may be local
time or GMT/UTC. The name/date/time can be changed from this item.
See Station Name/Date/Time for more information.
Recording
The proper state for Recording is ON or ON&TX. When recording is OFF, the unit is in a setup
mode and will not perform scheduled operations. The state of recording can be changed from
this item.
See Recording for additional information.
Alarm Status
Alarm status can be Normal, Alarm, or Alert.