Sutron Corporation 8310 & 7310 Users Manual 8800-1125Rev. 2.7 (BETA) 4/16/2014 pg. 58
Logged data: /Flash Disk/Data.log - ? for Help
09/24/2010 15:00:00 VBAT 13.81 G
09/24/2010 15:15:00 VBAT 13.69 G
09/24/2010 15:30:00 VBAT 13.81 G
09/24/2010 15:45:00 VBAT 13.81 G
09/24/2010 16:00:00 VBAT 13.81 G
09/24/2010 16:15:00 VBAT 13.69 G
09/24/2010 16:30:00 VBAT 13.81 G
09/24/2010 16:45:00 VBAT 13.81 G
You can use the arrow keys to navigate up and down through the data. Pressing “?” displays
help, showing special keys to quickly move through the log.
Special keys for viewing logged data:
space - Page Down backspace - Page Up
b - Beginning e - End
h - Hour+ H - Hour-
d - Day+ D - Day-
w - Week+ W - Week-
m - Month+ m - Month-
y - Year+ Y - Year-
Press Enter to continue:
Note: you can also go straight to the log data for a particular output directly from the Mx.Ox:
items in the main menu.
Recording
Recording Status can be OFF, ON or ON&TX. When OFF, the 8310 will not perform any of its
scheduled functions. Automatic Satellite transmissions, LOS radio alarm transmissions, and
telephone alarm transmissions are disabled when recording is OFF. It may still be able to
communicate with other systems, depending on the device; however, the data it sends will not
be updated to reflect current measurements.
When the Recording Status is changed to ON, it may do some initialization of sensors and
interfaces as needed to operate automatically. The status will show ON&TX if one of the
optional communications devices such as Satlink, IRIDIUM or GPRS is configured to make
automatic transmissions.
With Recording set to ON, the 8310 will use the schedule information to measure sensors, log
data, run the basic program, and make transmissions.
If you leave a site without setting Recording ON, the site will not collect new data. For this
reason, it is vital that you set Recording to ON as soon as the system has been setup.
To Next Page
Loading...
