Suzohapp Bill to Bill XT User Manual

- 1 - © 2015 Suzo-Happ
Operation Manual
1. The information contained here-in is the property of Suzo-Happ and is not to be disclosed or used without the
written permission of Suzo-Happ. This copyright extends to all electronic, print or visual media.
2. Under no circumstances any part of this publication may be copied, transmitted, transcribed or distributed in
any form or by any means, or stored in a database or retrieval system, or translated into any language (natural
or computer) without the prior written permission of Suzo-Happ.
3. Suzo-Happ reserves the right to change the product specifications at any time. Also, Suzo-Happ disclaims any
liability for any direct or indirect losses arising out of use or reliance on this information. This information is for
guidance only.
4. For any feedback or errors, please contact us at bill-to-bill@suzohapp.com
Revision History
30 Nov, 2015
First release

Suzohapp Bill to Bill XT Specifications

General

Brand	Suzohapp
Model	Bill to Bill XT
Category	Bank Note Validator
Language	English

Summary

Introduction

Safety Instructions

Guidelines for safe operation and handling of the Bill-to-Bill XT device.

Specifications

Technical specifications for banknotes, barcode coupons, interface, and power requirements.

System Description

Validating Head MFLV-9013

Description of the Validating Head module, its functions and subsystems.

Sense-A-Click

Information on Sense-A-Click modules used for banknote validation sensors.

Removing Chassis

Step-by-step instructions for removing the chassis from the housing.

Removing Recycling Cassettes

Procedure for removing recycling cassettes from the chassis.

Manual Unloading of Banknotes

Guidance on manually unloading banknotes from cassettes when needed.

Removing Dispensing Cassette

Instructions for removing the dispensing cassette from the chassis.

Opening Dispensing Cassette

Removing Path Switch

Removing Power Interface Module

Removing Cash Box

Installation

Installation Instructions

Grounding Procedures

Chassis Security Lock Installation

Housing Security Lock Installation

Cash Box Security Lock Installation

Power and Interface Connection

Modes of Operation

Software Updates

Update from Memory Cards

Steps for updating software using Single Load and Multi Load memory cards.

Single Load Memory Card Update

Procedure for updating with a single load memory card.

Multi Load Memory Card Update

Procedure for updating with a multi load memory card for multiple units.

Update from Host Machine

Method for updating software via a network connection using a host controller.

Update Diagnostics and Errors

Operational Diagnostics

Preventative Maintenance