EasyManua.ls Logo

Suzuki GZ250 User Manual

Suzuki GZ250
35 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Suzuki GZ250 and is the answer not in the manual?

Suzuki GZ250 Specifications

General IconGeneral
Displacement249 cc
Bore x Stroke72.0 mm x 61.2 mm
Compression Ratio9.0:1
IgnitionElectronic ignition (transistorized)
StarterElectric
Transmission5-speed constant mesh
Final DriveChain
Front SuspensionTelescopic, coil spring, oil damped
Rear SuspensionSwingarm type, coil spring, oil damped
Rear BrakesDrum
Rear Tire130/90-15M/C 66S, tube type
Dry Weight137 kg (302 lbs)
Engine Type4-stroke, single cylinder, SOHC
Front BrakesSingle disc
Ground Clearance150 mm (5.9 in)

Summary

Fuel and Engine Oil Recommendations

Fuel System and Transmission Operation

Fuel Valve Positions

Explanation of the fuel valve settings: ON, RES, and PRI.

Break-in and Suspension Adjustment

Motorcycle Break-In Procedures

Guidelines for breaking in the engine and tires for optimal performance.

Pre-Ride Inspection Procedures

Essential Pre-Ride Checks

Essential pre-ride checks to ensure safety and prevent accidents.

Riding Techniques and Starting

Starting the Engine

Procedures for starting the engine, both cold and warm.

Starting Off and Shifting Gears

How to start moving and shift gears smoothly.

Operation and Maneuvers

Using the Transmission Effectively

Proper gear selection for speed ranges and conditions.

Inspection and Maintenance Schedule

Maintenance Notice and Schedule

Importance of regular maintenance and the recommended schedule.

Maintenance Details and Lubrication

Maintenance Chart and Intervals

Table detailing inspection and maintenance intervals based on mileage and time.

Key Component Maintenance

Battery Care and Removal

Information on battery maintenance, removal, and charging.

Air Cleaner Element Service

Procedure for cleaning or replacing the air cleaner element.

Engine Oil Management

Engine Oil Level Check and Change

Steps for checking oil level and performing oil and filter changes.

Carburetor and Fuel System Checks

Carburetor Adjustments

How to adjust idle speed and throttle cable play.

Drive Train Adjustments

Drive Chain Inspection and Service

How to inspect, clean, and oil the drive chain.

Brake System and Drive Chain

Brake Fluid and System Checks

Checking brake fluid level and system inspection.

Brake System Details

Brake Pad Wear Inspection

How to check front brake pads for wear.

Tire Safety and Maintenance

Tire Pressure and Loading Guidelines

Importance of correct tire pressure and load limits.

Tire Condition and Type Selection

Inspecting tire condition and choosing the correct tire type.

Wheel and Interlock Systems

Electrical System and Troubleshooting

Troubleshooting Common Problems

A guide to diagnosing and fixing common motorcycle issues.

Related product manuals