Suzuki HP-9 - HP-8 & HP-9 ASSEMBLY; Final Stand Assembly and Connections

2
•.. / ASSEMBLE THE PIANO STAND AS SHOWN BELOW
. (CQNTlNUED)
NEEDED.
'!t-
ONTHE BOTTOM RIGHT PORTION OFTHE PIANO, PLUG THE PEDAL CABLE INTO ITS RECEPTACLE. (THE
PLUG CAN ONLY BE INSERTED ONE WAY, MAKE SUREITIS PROPERLY ALIGNED BEFORE INSERTION.)
9
'"
-+
-,
~"''' -+
~~
~~
,'"
'>. -,
" "-
DO ALL YOUR FINAL TIGHTENING ONLY AFTER THE ASSEMBLY PROCEDURE HAS BEEN COMPLETED.
B)
YOU MAY NOWDO YOUR FINAL TIGHTENING ONTHE PIANO STAND AND PLACE THE SCREW CAPS WHERE