Suzuki Super Swift User Manual

2-100
BEFORE DRIVING
52RM0-01E
Driving time
52RM21120
(11) Driving time
Driving time from previous reset is shown.
To reset the driving time, push and hold the
indicator selector knob (3) for about 2 sec-
onds when the display indicates a driving
time. The display shows “---” and then indi-
cates a new driving time after driving for a
short time.
NOTE:
Disconnection of the lead-acid battery neg-
ative (-) terminal will reset the indication of
the driving time.
Clock and date
Date and time are shown. For the setting
procedure, refer to “Setting mode” in this
section.
Motion
52RM21130
This indicates how the center of gravity is
moved while driving.
G (acceleration of gravity) position applied
to the vehicle body while driving is shown
by a globe (12).
When the vehicle is stopped, historical
data of G positions applied to the vehicle
body during the driving is shown as a
graph (13).
G position history graph at the vehicle
stopped can be changed to indicate or
hide. For details, refer to “Setting mode” in
this section.
NOTE:
• If G position history graph at the vehicle
stopped has been set in indication
mode, the graph (13) is shown for sev-
eral seconds when you turn the ignition
switch to “LOCK” position or change the
ignition mode to “LOCK” (OFF) after
driving.
• The graph is shown approximately and
the actual movement may differ.
Torque and power
Present engine torque and power are
shown.
Accelerator and brake
Present accelerator pedal depressing
degree and brake line pressure are shown.
The display is selectable to indicate or not
to indicate. For details, refer to “Setting
mode” in this section.
(11)
EXAMPLE
(12) (13)
EXAMPLE
WARNING
Do not look in the display while driv-
ing. Doing so may result in an unex-
pected accident.

Suzuki Super Swift Specifications

General

Brand	Suzuki
Model	Super Swift
Category	Automobile
Language	English