3-80
OPERATING YOUR VEHICLE
52RM0-01E
Handling dual sensor
52RM30390
(1) Dual sensor
WARNING
The detection performance of the
dual sensor has limits and the dual
sensor cannot detect all vehicles,
pedestrian, object of the high beam
assist (such as the lights of the vehi-
cle in front of you, street lamps, etc.)
or partition lines. Do not rely exces-
sively on the system and always
drive in a safe manner.
• Observe the following instructions
in order to keep the dual sensor
functioning properly. If mishandled,
the dual sensor cannot accurately
detect a vehicle, a pedestrian, an
object of the high beam assist
(such as the lights of the vehicle in
front of you, street lamps, etc.) or
partition lines in front of you, the
system will not function properly
and unexpected accidents may
occur.
– Do not touch the lens of the dual
sensor.
– Do not clean the lens of the dual
sensor by yourself.
– Do not strike the body of, or any
surrounding parts of the dual
sensor.
(Continued)
WARNING
(Continued)
– Do not remove or disassemble
the dual sensor.
– Do not stick or affix anything to
the lens of the dual sensor, not
even clear items.
• When the windshield around the
dual sensor is deformed or dam-
aged, or the windshield in front of
the dual sensor is cracked because
of an accident, the dual sensor can-
not detect the front a vehicle, a
pedestrian, an object of the high
beam assist (such as the lights of
the vehicle in front of you, street
lamps, etc.) or partition lines prop-
erly. If driving with these damaged
parts, the dual sensor brake sup-
port will not function properly and
unexpected accidents may occur.
Operate the dual sensor brake sup-
port OFF switch to turn off the dual
sensor brake support, and ask an
authorized SUZUKI dealer to have
them inspected.
(Continued)
To Next Page
Loading...
Need help?
General
