3-84
OPERATING YOUR VEHICLE
52RM0-01E
NOTE:
When the function of the dual sensor is
temporarily stopped or malfunctioning, all
of following functions will be turned off.
• Dual sensor brake support
• Lane departure warning
• Vehicle swaying warning
• High beam assist
Temporary stop of the dual sensor
Under the following situations, the function
of the dual sensor stops temporarily.
When the situations are improved, the
temporary stop of the function will be can-
celed.
• When the visibility of the dual sensor is
poor
Refer to “Situations where the dual sen-
sor may not activate properly” in this
section for details.
• When the temperature of the body of
dual sensor is high
• When the systems related the dual sen-
sor brake support are stopped temporar-
ily
• When the battery has a voltage abnor-
mality
Failure of the dual sensor
When the dual sensor is failure, the func-
tion of the dual sensor is stopped until the
engine switch is pressed to change the
ignition mode to LOCK (OFF).
Find a safe place to park and change the
ignition mode to LOCK (OFF) by pressing
the engine switch.
Restart the engine, and check that the dual
sensor brake support indicator light and
lane departure warning indicator light go
off.
• If both of the indicators stay on after
restarting the engine, there may be a
failure of the dual sensor. Ask an autho-
rized SUZUKI dealer to have the dual
sensor inspected.
NOTE:
• Under the following situations, the dual
sensor brake support indicator light and
lane departure warning indicator light
come on after the engine has been
started, it does not indicate a malfunc-
tion. Once the engine switch is pressed
to change the ignition mode to LOCK
(OFF) and then the engine is restarted,
these indicators will go off.
– When the automatic brake system has
been operating 3 times
– When the automatic brake system has
been operating for long periods
• The function of the dual sensor is
stopped if the dual sensor brake support
indicator light and lane departure warn-
ing indicator light come on and there
may be a failure of the dual sensor, but it
does not hinder normal driving.
Pedestrian detection
The dual sensor detects pedestrians by
whose size, shape or motion.
75RM238
(1) About 1 – 2 m (3.3 – 6.6 ft)
WARNING
Even when the detection conditions
are satisfied, not all pedestrians may
be detected by the dual sensor.
In the following situations, there may
be a high possibility of undetectable
or delay of detection. Always drive in
a safe manner.
• A person who walks in a group
• A person who walks beside a wall
or another obstacle
• A person who has an umbrella up
• A person whose color is similar to
the background and who is
blended into the scenery
(Continued)
To Next Page
Loading...
Need help?
General
