3-102
OPERATING YOUR VEHICLE
52RM0-01E
TPMS setting (For instrument clus-
ter - Type A)
• You can set one of the initial value of tire
pressure below that is indicated on the
tire information label.
– Comfort Mode
– Load Mode
For details on how to set the mode, refer to
“Setting mode” in “BEFORE DRIVING”
section.
TPMS setting (For instrument clus-
ter - Type B or C)
• You can check the current tire inflation
pressure on the information display.
• You can set one of the initial value of tire
pressure below that is indicated on the
tire information label.
– Comfort Mode
– Load Mode
To check the current tire inflation pres-
sure
52RM20560
1) When the ignition mode is “ON” and the
vehicle is stationary, push and hold the
indicator selector knob (1) on the instru-
ment cluster for more than 3 seconds to
change the information display to the
setting mode.
WARNING
If the loading weight has changed,
adjust the tire pressure according to
the tire information label and set the
initial value via the information dis-
play. If the loading weight, tire pres-
sure and initial value do not match,
the tire pressure monitoring system
will not function properly.
WARNING
If the loading weight has changed,
adjust the tire pressure according to
the tire information label and set the
initial value via the information dis-
play. If the loading weight, tire pres-
sure and initial value do not match,
the tire pressure monitoring system
will not function properly.
To Next Page
Loading...
