5-13
OTHER CONTROLS AND EQUIPMENT
52RM0-01E
52RM50190
3) Install the towing hook (1) by hand.
NOTE:
It is recommended to secure the cover with
tape to prevent damage during towing.
52RM50200
4) To tighten the towing hook (1), turn it
clockwise by using a wheel wrench (B)
until the hook (1) is securely installed.
To remove the towing hook (1), reverse the
installation procedure.
Rear
52RM50210
The frame hook (2) is provided on the rear
of the vehicle for use in emergency situa-
tions and sea shipping purposes only.