7-17
INSPECTION AND MAINTENANCE
52RM0-01E
52RM60030
2) Remove the oil filler cap.
3) Place a drain pan under the drain plug.
4) Using a wrench, remove the drain plug
and drain the engine oil.
60G306
Tightening torque for drain plug:
35 Nm (3.6 kg-m, 25.8 lb-ft)
5) Reinstall the drain plug with new gas-
ket. Tighten the plug with a wrench to
the specified torque.
NOTE:
• Whenever the engine oil is changed, the
oil life monitoring must be reset to moni-
tor the next oil change timing properly.
To reset the light, consult an authorized
SUZUKI dealer. If you reset it by your-
self, refer to “Setting mode” in “BEFORE
DRIVING” section.
• For more information of the oil change
request light and oil life monitoring, refer
to “Oil change request light (if equipped)”
or “Information display” in “BEFORE
DRIVING” section.
• Ask an authorized SUZUKI dealer for
changing engine oil and filter if you have
difficulties.
CAUTION
The engine oil temperature may be
high enough to burn your fingers
when the drain plug is loosened. Wait
until the drain plug is cool enough to
touch with your bare hands.
WARNING
Engine oil can be hazardous. Chil-
dren and pets may be harmed by
swallowing new or used oil. Keep
new and used oil and used oil filters
away from children and pets.
Repeated, prolonged contact with
used engine oil may cause skin can-
cer.
Brief contact with used oil may irri-
tate skin.
(Continued)
WARNING
(Continued)
To minimize your exposure to used
oil, wear a long-sleeve shirt and
moisture-proof gloves (such as dish-
washing gloves) when changing oil. If
oil contacts your skin, wash thor-
oughly with soap and water.
Launder any clothing or rags if it is
with oil.
Recycle or properly dispose of used
oil and oil filters.
To Next Page
Loading...
Need help?
General
