EasyManuals Logo

Sven PLATINUM User Manual

Sven PLATINUM
3 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
ENG
Congratulations on the purchase of TM SVEN surge protector!
SVEN Platinum s
urge protector is designed for connection of electrical
appliances to the electrical network and their protection against high-voltage
surge pulses and permanent ltration of high-frequency noises.
FEATURES
Individual socket switches with On state lighting for each socket
Power LED indication
High-performance LC-lter for noise and interference protection throughout
the supply main
Powerful varistor high-voltage discharge protection (lightning and industrial
interferences)
Automatic restorable fuse for cutting-o at overloads and short circuits
Construction of output sockets allows to connect both modern Russian and
Euro plugs
Wall-mountable in any position
Non-ammable high-impact ABS-plastic case ensures high re safety level
SAFETY PRECAUTIONS
Do not connect the surge protector to the electrical network with overrating
voltage.
Do not connect the load to the surge protector with the total power, which
exceeds the power indicated in specications of this device.
Do not install the surge protector in places with possible ingress of liquid,
moisture, dust and high temperature exposure.
Do not open and do not make any repairs by yourself.
It is recommended to connect the surge protector to the grounded electrical
network.
CONNECTION
Connect equipment to surge protector sockets.
Connect the surge protector to 220 V electrical network, turn on the master
switch.
Turn on a required load using individual switches.
Every switch has the turn on condition backlighting
OPERATION
Do not overload the surge protector by connection of several powerful
devices.
On operation of the automatic fuse due to the overload, turn on the surge
protector once more in 5-10 minutes after reduction of the total connected
load to a permissible limit. For this purpose, press the on/o button on the
fuse.
If high-voltage impulses or intolerable high voltage occurs at the surge
protector input, the built-in emergency protection can disconnect the surge
protector completely. The surge protector operation with the partial or com-
plete resource loss of the surge protector components is intolerable.
Operation Manual
Power Strip Surge Protector
PLATINUM
PLATINUM

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sven PLATINUM and is the answer not in the manual?

Sven PLATINUM Specifications

General IconGeneral
Number of Outlets6
Cord Length1.8 m
ModelPLATINUM
TypeSurge Protector
Maximum Voltage250 V
Protection ModesL-N, L-PE, N-PE
Weight0.5 kg

Related product manuals