ENG
5
User Manual
PS-285
The use in the wired mode (AUX)
•Speaker system can be used as an external device for amplifying any audio source
with a 3.5 mm output mini-jack. To do this, connect a cable 3.5 mini-jack – 3.5 mini-jack
to the audio input AUX f.
TECHNICAL SPECIFICATIONS
Parameter, measurement unit Value
Frequency range, Hz 60-20000
Output power (RMS), W 20 (2 × 10)
Membrane, mm Ø 52
Rated current consumption, A 0.23
Battery capacity, mA*h 3000
Power supply USB /
5 V
Weight, g 900
Dimensions, mm 90×210×92
Notes:
• Technical specifications given in this table are supplemental information and cannot
give occasion to claims.
• Technical specifications and package contents are subject to change without notice
due to the improvement of SVEN production.
Fig. 2. Connection diagram
To Next Page
Loading...
