EasyManua.ls Logo

SVS Sound Revolution 3000 Micro User Manual

SVS Sound Revolution 3000 Micro
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
4
For connection to a Stereo Receiver or Pream-
plifier without auto-set-up, adjust the 3000
Micro volume to match the output of your
main speakers, and adjust the low pass filter
to blend the bass between the 3000 Micro and
your speakers. If needed, consult with our
Sound Experts on the best phase setting.
For additional guidance on recommended crossover or low pass filter settings specific to your system,
visit our Subwoofer Matching Tool at www.svsound.com/merlin, or contact our Sound Experts.
For connection to an AV Receiver, set the 3000 Micro volume to -10 in the app (on
the rear panel, all but the last two lights illuminated). Set the low pass filter to LFE
and the phase to 0 degrees, then run auto-set-up on the AV Receiver. Always
re-run set-up if you move the subwoofer to
another location.
The rear panel features an intuitive user interface with controls for adjusting the subwoofer’s
primary settings. The blue LED bar shows settings for Volume, Low Pass Frequency, and Phase.
Simply press the setting you want to change and then use the “+” and “-” buttons to adjust the
settings.
Please note, some DSP settings can only be accessed using the SVS app.
The SVS App is the easiest and most convenient
way to access all of the advanced control features
available on your 3000 Micro, from the comfort of
your favorite seat.
1
Unbox It
Quick Start Guide
3000 Micro
Get Control
5
Get Calibrated
HOME / VOLUME
MOVIE
PRESET
LOW PASS FILTER
OPTIONS
-22
10050
20 40
200
0
6
4
2
0
-2
-4
-6
-8
-10
-12
PEQ1
ACTIVE
PEQ2
ACTIVE
PEQ3
DISABLED
BOOST: 0 dB
Q FACTOR: 1.2
FREQ: 200
Hz
PARAMETRIC EQ
AUTO EQ - START
MIC INPUT
If you followed the 3000 Micro Subwoofer unboxing instructions properly you
will have the following items in front of you. Please confirm all pieces are
available before continuing.
Congratulations on choosing the SVS 3000 Micro, one of the most powerful and advanced
subwoofers in the world. We know you’re anxious to get it cranking so the following steps will
guide you through the quick and easy installation process.
We strongly recommend reading the 3000 Micro Owner’s Manual to get the best possible
performance out of your new subwoofer. You’ll find useful information about subwoofer
placement, connections, DSP functions and more. The full SVS 3000 Micro Owner’s Manual can be
found here: www.svsound.com/3000-Micro-manual
Your SVS 3000 Micro Subwoofer can be controlled from the SVS Mobile App or
via the rear panel for maximum flexibility when optimizing performance based
on your room layout, speakers, system set-up and more.
Download The App
On The Subwoofer
For iOS, Android, & Amazon Devices
[3000 Micro Subwoofer] [Detachable Power Cord]
+
VOL
LOW
PASS
LOW PASS
PHASE
PHASE
0°
90° 180°
30Hz 40Hz 60Hz 90Hz 140Hz LFE
_
AUTO [amber]
ON [blue]
AUTO / ON
UP (+)
LOW PASS FREQUENCY
PHASE
VOLUME
DOWN (-)
REG
ISTER
REG
ISTER
Register Your
New SVS Product:
Thank you for choosing SVS! Registering your SVS product expedites any Sound Experts
support requests, confirms your warranty registration and provides a proof of purchase.
Plus, as a registered customer, youll be the first to get SVS news and updates.
Register your product now at: www.svsound.com/register
Question and Answer IconNeed help?

Do you have a question about the SVS Sound Revolution 3000 Micro and is the answer not in the manual?

SVS Sound Revolution 3000 Micro Specifications

General IconGeneral
BrandSVS Sound Revolution
Model3000 Micro
CategorySubwoofer
LanguageEnglish

Summary

Get Control Options

Download The SVS App

Access advanced features and optimize performance remotely from your smartphone.

On-Subwoofer Controls

Use the rear panel interface with blue LED bar for Volume, Low Pass Frequency, and Phase adjustment.

Unbox Your Subwoofer

Subwoofer Placement

Corner Placement Guide

Offers huge impact and reduces bass nulls. Adjust if 'boominness' occurs.

Front Placement Guide

Best for blending with main speakers and minimizing localization effects.

Side Wall Placement Guide

Effective for excellent accuracy and output, though less frequently used.

Connecting Your Subwoofer

Single LFE Channel Connection

Connect AV Receiver's 'SUB 1' output to the 3000 Micro's 'LFE' input with an RCA cable.

Stereo Receiver/Preamplifier Connection

Connect using Stereo Receiver or Preamplifier Left/Right Channels for advanced setups.

Related product manuals