Swan Analytical Instruments AMI Option USB Interface V1 - Page 2

USB Interface installation 108498 - 05/16 2
Interface version Function Requirement
A-81.420.040
1)
USB support Mainboard 2.0 to 2.4
Firmware V5.00 or higher
A-81.420.042 USB support Mainboard 2.0 or higher
Firmware V5.00 or higher
USB support &
2)
3
rd
signal output
Mainboard 2.5 or higher
2)
Firmware V6.00 or higher
1) Do not use with mainboard 2.5 or higher (causes short circuit)
2) Can be operated in parallel, requires mainboard 2.5 or higher and firmware 6.00
or higher
CAUTION
Risk of damage to the equipment
Please observe the compatibility notes below.
Compatibility