Need help?Do you have a question about the Swandoo MARIE 3 and is the answer not in the manual?
General| Category | Baby & Toddler Furniture |
|---|---|
| Product Name | Swandoo MARIE 3 |
| i-Size | Yes |
| Installation | ISOFIX |
| Product Type | Convertible Car Seat |
| Weight Limit | 18 kg |
| Foldable | No |
| Removable Cover | Yes |
| Vibrations | No |
| Music | No |
| Toy Bar | No |
| Type | Car Seat |
| Direction | Rear and forward facing |
| Material | Polyester |
| Child Weight | 0-18 kg |
Place ISOFIX guides and fold out support leg.
Extend connectors, insert them, and check safety indicators.
Push seat against vehicle seat until firm and secure support leg.
Insert Buddy into socket and rotate until it snaps in.
Slide safety lock, push rotation button, and rotate seat.
Guidance on when to switch from rearward to forward facing based on child's height.
Open buckle, adjust harness for space, and attach shoulder pads.
Place baby, use newborn pillow if needed, and tighten harness.
Pull adjuster strap and move headrest to match baby's eye level.
Press recline trigger and select desired position, confirming with 'click'.
Pull triggers on each side to unhook ISOFIX connectors and slide them back.
Remove newborn pillow and open back pocket to remove padding.
Remove crotch strap and harness covers by opening them.
Use installation tool to tuck fabric edge and ensure covers are correctly placed.
To Next Page