Need help?Do you have a question about the Swann GuardianEye and is the answer not in the manual?
General| Camera Resolution | 1080p (1920 x 1080 pixels) |
|---|---|
| Night Vision | Yes |
| Audio | Two-way audio |
| Storage | Cloud Storage |
| Connectivity | Wi-Fi |
| Mobile App | Swann Security App |
| Night Vision Distance | 32ft / 10m |
| Motion Detection | Yes |
| Indoor / Outdoor | Indoor & Outdoor (IP65 rated) |
Details FCC compliance, safety instructions, and user warnings for device operation.
Covers important notices on jurisdictional laws and US regulations against eavesdropping.
Explains password creation, forgetting, and provides context about the manual's accuracy.
Allows viewing a single video channel in full-screen mode by double-clicking.
Details status icons and menu bar functions for NVR and camera operation.
Enables repositioning of video channels on the screen by clicking and dragging.
Explains icons for network connection, recording status, and Wi-Fi signal strength.
Details icons for motion detection, audio selection, and video loss indication.
Explains accessing main menu sections like Recording, Search, Motion, Network, System, Wizard.
Details initial system settings like Language, Video Standard, and Time Zone.
Describes the Recording, Search, and Motion menu functions for camera and event management.
Covers Network, System settings for configuration and the setup Wizard.
Configures camera name, encoding, bitrate, and frame rate for video streams.
Displays connected cameras, their status, and allows channel assignment or disconnection.
Selects a camera and assigns a custom name up to 16 characters.
Sets OSD position, record audio, resolution, frame rate, and bitrate for streams.
Explains unique channel assignment for cameras and avoiding duplicates.
Describes repositioning cameras in Live View and how to disconnect a camera.
Enables motion detection and allows defining specific detection areas.
Adjusts motion sensitivity levels and configures the detection schedule.
Enables sending email notifications when motion is detected.
Explains how to draw and manage motion detection zones on the camera feed.
Details modifying motion detection sensitivity using a slider for time periods.
Describes using a 24-hour grid to set motion detection times and days.
Offers advice on optimal camera placement for effective motion detection.
Provides methods to prevent unwanted motion detection alerts from environmental factors.
Explains Normal (continuous), Motion, and None recording modes.
Details using the grid to select recording modes for specific time periods.
Describes the 24-hour grid for searching recorded events by date and time.
Explains saving important events to a USB storage device.
Guides users on selecting year, month, and day for video search.
Details playing back selected videos and saving important events to USB.
Details controls for Play, Pause, Fast Forward, and Fast Rewind during playback.
Covers features like Cut, Copy, Hide, Exit, and Zoom for playback management.
Guides on selecting specific videos or entire days for backup to USB.
Details initiating backup, connecting USB, and managing storage devices.
Covers settings like resolution, time zone, email, password, and Daylight Saving.
Explains how to perform firmware upgrades from local or cloud sources.
Sets display language, video standard (NTSC/PAL), and screen resolution.
Configures time zone, system time, and synchronization with a time server.
Automatically synchronizes NVR clock with an online time server for accuracy.
Enables and sets the offset, mode, and start/end times for Daylight Saving.
Specifies the exact start and end times for Daylight Saving adjustments.
Details the process and implications of formatting the NVR's hard drive before use.
Configures scheduled reboots and restores system settings to factory defaults.
Covers upgrading firmware from local USB, cloud, or IPC USB sources.
Explains DHCP vs Static IP, IP Address, and Subnet Mask for network connection.
Sets the default gateway for internet connectivity and configures DNS servers.
Configures email alerts, server port, and HTTP port for remote access.
Enables NTP for time sync and explains the NVR's unique identification (UID).
Guides on entering SMTP details, recipient addresses, and testing the configuration.
Explains switching from AP mode to Station mode for router connection.
Guides on connecting to a router, entering passwords, and syncing cameras.
Allows assigning a device name and viewing system details like model and version.
Guides on resetting NVR network settings and individual camera communication.
Details restoring cameras to AP mode using Ethernet and reset button.
Guides on syncing cameras after reset and reconnecting them to the network.
Defines terms like AP Mode, DHCP, IP Address, NTP, DNS, and Display Resolution.
Explains Bitrate, Frame Rate, Resolution, OSD, and video system standards.
Defines Static IP, Station Mode, Sub Stream, Subnet Mask, SMTP Port, and SSID.
Explains the Unique Identifier (UID) used for NVR communication.
Outlines the product's one-year warranty period, coverage, and exclusions.
Provides specific warranty information and consumer guarantees for Australia.
Provides email, website, and telephone numbers for technical assistance.
To Next Page
