Need help?Do you have a question about the Swann DVR-1580 and is the answer not in the manual?
General| Brand | Swann |
|---|---|
| Model | DVR-1580 |
| Category | Security System |
| Language | English |
This equipment has been tested and found to comply with FCC rules for digital devices.
Instructions on safe installation, operation, and ventilation for the DVR and its components.
Details on creating, managing, and recovering DVR passwords, including using MAC address.
Options related to video output resolution, transparency, and audio.
Settings for video recording parameters like overwrite, pre-record, and post-record.
Functions for searching and playing back recorded video footage.
Settings for camera display, resolution, and naming.
Configuration for recording parameters for each camera.
Settings for alarm events like motion detection and video loss per camera.
Ability to create masked areas on camera feeds for privacy.
Select the specific camera to configure from the available channels.
Choose camera signal type (AUTO, TVI, AHD) for optimal compatibility.
Access tools for adjusting image properties like brightness and contrast.
Set video resolution and frames per second for streams.
Set the maximum bitrate for Main Stream and Sub stream.
Configure the motion detection area for the selected camera.
Set the default motion detection alarm schedule.
Configure actions for motion detection (audio, email, triggers).
Adjust motion detection sensitivity level for each time period.
Create, delete, or manage motion detection zones.
Guidance on optimal camera placement for motion detection.
Tips to minimize false motion detection from environmental factors.
Set a schedule for when video loss alarms are active.
Configure actions to take when a video loss event occurs.
Set Baudrate, Data Bit, Stop Bit, and Parity for PTZ.
Select control protocol and command address for the PTZ device.
Use directional buttons and speed settings to move the camera.
Control zoom and focus for detailed camera views.
Access the PTZ control menu for advanced settings.
Interface for controlling PTZ camera and managing presets.
Save current positions and recall them later.
Add and manage preset positions in a patrol sequence.
Start and manage automated camera movement patrols.
Manage recording behavior for storage and event capture.
Split recordings into units for continuous playback.
Enable audio recording if a microphone is connected to the DVR.
Choose stream type, resolution, frame rate, and bitrate.
Manage overwriting oldest video files to conserve storage space.
Configure recording duration before and after events.
Select recording modes like Normal, Motion, or None.
Customize the recording schedule for each camera.
Search and play recorded videos from the DVR's hard drive.
Save important events to a USB storage device.
Specify video type, start, and end times for playback search.
Select cameras for playback (up to 4 channels at a time).
Filter playback by recording type and time range.
View an overview of video recorded on a specific day/month.
Mute, Cut, Copy, Play, Pause, Rewind, Fast Forward, Slow Forward.
Mark in/out points and save video segments to USB.
Zoom in, out, or into specific regions of the video.
Hide interface for better view or exit playback mode.
Select camera, event type, start, and end times for event search.
Play selected video events from the log.
Select cameras, video type, and time range for backup.
Connect USB, select files, and start the backup process.
Configure system settings like language, resolution, and password.
Manage user accounts and their permissions.
View system details and access maintenance functions.
Choose system language and video standard (NTSC/PAL).
Set time zone, date format, and system time.
Enable password protection and set auto lock time.
Create new user accounts or remove existing ones.
Adjust user passwords and access permissions.
Enable and schedule automatic DVR reboots.
Upgrade firmware from USB or check for latest version.
Restore default settings or export/import configuration files.
Select the type of exception for notification.
Configure audio warnings and email notifications for exceptions.
Format the DVR's hard drive using the initialization option.
Adjust display resolution and menu transparency.
Configure mouse sensitivity and display border settings.
Enable audio monitoring during Live View mode.
Select network connection type (DHCP, Static, PPPoE).
Configure IP address, subnet mask, and gateway.
Define DNS servers; Auto DNS is recommended.
Set up DDNS for remote access and NTP for time sync.
Control device access and configure server/HTTP ports.
Enable UPNP for port forwarding and use DVR UID for access.
View DVR name, model, build, hardware, and firmware versions.
Displays the unique identifier of the DVR.
Specify major type, minor type, start, and end times for log search.
Perform log searches and clear system logs.
Displays the current network status (Local, DHCP).
Shows IP address, subnet mask, and default gateway.
Displays preferred and alternate DNS server settings.
Lists S.M.A.R.T. attributes like Name, Current, Worst, Threshold, Status.
Displays DVR name, model, build, hardware, config, and firmware versions.
Displays the unique identifier of the DVR.
Provides email, website, and phone numbers for support.
Lists phone numbers for USA, Australia, New Zealand, and UK support.
To Next Page